JSON-LD markup generated by Google Structured Data Markup Helper.

Call (619) 456-4880

Go to…

RAM

Home / RAM

We Service and Repair all RAM cars

  • 2014 RAM 1500

    RAM 1500
    Mileage
    52,368
    Service Date
    3/26/2024
    Services Performed
    • Inspect steering and suspension- no play detected, and no safety issues. Upper ball joint boots are torn, but no play detected. Front and rear bump stops are good. Recommend replace shocks w/ better quality shocks (Bilstein), and re check suspension.
    • SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – RWD w/Steel Springs,Both Sides – [DOES NOT include alignment.]
    • Check operation and road test. Vehicle drives good, and suspension feels good (does not bottom out). Vehicle is due for oil service in 1k miles. Brakes and tires are good.
     
    Cary F. gave our service a 5 star review on 3/28/2024

  • 2015 RAM 2500 HD

    RAM 2500 HD
    Mileage
    120,337
    Service Date
    3/6/2024
    Services Performed
    • Customer supplied intake air heater bypass kit, crankcase breather (oil separator), oil and filter for oil service, radiator hoses, and front sway bar links. Customer also request fuel filter replacement, but does not have filter. *NOTE* Vehicle has a dent on R/F fender, and drivers door upon arrival.
    • Installed new heater grid delete by customer request. Kit comes complete replacing stock components, except intake temp, and fuel pressure wires had to be extended/ lengthened and re routed (pulled heater wire out of harness) Old parts are in vehicle. Check operation good.
    • Remove and replace both upper and lower radiator hoses. *Note* Customer supplied hoses, no warranty on parts. Add new diesel coolant. Check operation and road test.
    • Change engine oil, visual brake inspection. Check air filter, tires, and all fluids. Lube chassis as necessary. Top off fluids. Set tire pressures to spec. Reset maintenance indicator.
    • *Note* no warranty on customer supplied part.
    • Remove and replace fuel filter , bleed system
    • Check operation and road test. *Note* Track bar is worn (excessive play). Customer will return for aftermarket track bar replacement after customer has available part.
     
    Johnathan S. gave our service a 5 star review on 3/6/2024

  • 2016 RAM ProMaster City

    RAM ProMaster City
    Mileage
    91,694
    Service Date
    2/7/2024
    Services Performed
    • Road test vehicle- vehicle runs good, no issues detected. No DTC codes stored. Lift vehicle and inspect- oil service is due per sticker, but oil looks good (looks new). Recommend replace cabin air filter (dirty/ restricted). Tires are good (7/32nd thread depth). Set tire pressures to 39psi front/ 42psi rear. Brakes are good (F 8mm/ R 2-3mm- drum), but recommend clean and adjust rear brakes. Motor mounts have slight play when loading up drivetrain, advise customer mounts will require replacement soon.
    • Fuel system not ready, and EGR not ready, all other monitors are ready. Advise customer to drive vehicle, and re check monitors before Smog inspection (currently not ready- customer indicates battery was replaced).
     
    Jere D. gave our service a 5 star review on 2/7/2024

  • 2014 RAM 1500

    RAM 1500
    Mileage
    50,807
    Service Date
    1/31/2024
    Services Performed
    • Top off fluids. Fluids and filters are good. Brakes and tires are good. Set tire pressures to 42psi. Reset maintenance indicator.
    • Complete transmission flush using 16 quarts of synthetic atf. Cleans and conditions valve body, torque converter and all internal components.
    • Customer request install Handicap license plates front and rear, and remove front license plate frame (leave rear frame).
     
    Cary F. gave our service a 5 star review on 1/31/2024

  • 2014 RAM 1500

    RAM 1500
    Mileage
    51,952
    Service Date
    1/30/2024
    Services Performed
    • Customer indicates vehicle is misfiring on cylinder #8. Customer replace spark plugs, & swapped coils, but misfire is still present. Customer indicates PCM was replaced (recommended by another repair facility), but vehicle still misfires. Customer has another new PCM in vehicle if needed. Scan computer for DTC codes- P0308 cylinder #8 misfire detected/ P2322 Ign coil 8 sec. circuit/ P0206 FI 6 open/ U0100 TCM no comm w/ ECM. Install scanner to read live data, and vehicle is misfiring on #8 cylinder. Check for power to #8 ignition coil- no signal to fire #8 ignition coil (when coil does not get power, fuel injector does not get power as well). Inspect electrical connector for #8 coil, and found broken wire @ connector. Recommend replace #8 ignition coil electrical connector (pigtail), and re check operation (recheck for misfires).
    • Clear engine light, check operation and road test. Check engine light is out, and vehicle runs good (does not misfire). *Note* Advise customer vehicle is missing some coil hold down bolts.
     
    Eric S. gave our service a 5 star review on 1/30/2024